Arch Supplies

Fire Brick 1/2 Size. 1 1/4" Thick x 4 1/8" Wide x 8 3/4" Long. This brick rated for temperatures up to 3000 degrees Farenheight.

Fire Brick Standard 2 3/8" Thick x 4 1/8" Wide x 8 3/4" Long. This firebrick is rated for up to 3000 degrees Farenheight.

Woven Rail Gasket 1/4"x 1 1/2"x 50' Roll. This woven gasket is desgined to go on the railing of the arch and is held in place by the weight of the ...

Flat Arch & Pan Gasket 1/2" x 2" x 50' Roll. (This used to come in 25' rolls). This gasket is used between the railing of the arch and the pans...

Arch & Pan Gasket 1" x 2" x 25' Roll. This gasket is used between the railing of the arch and the pans. It just lays on the arch and the weight...

A wider pan gasket used to protect the stainless on the railing of the evaporators. This is put down and is wide enough to tuck inside the ceramic ...

Insulating Arch Board 1" thick by 12" wide and 3' long. The arch board is used to line the arch before the firebrick is placed in the arch. It is s...

Used in oil fired arches, or on the doors for an airtight front wood arch. This blanket can also be cut to certain dimensions and used in between t...

Tube of High Temperature Fire Caulking.

A light weight insulation used for insulating a wood fired evaporator between the baffolds. Using vermiculite will do a better job insulating than ...

This pail of cement is premixed and ready to use. On average customers can cement between 100-110 bricks out of a single 50lb pail.

This pail of cement is premixed and ready to use.

These firing gloves are great for loading wood into the arch. 12" from the tip of the finger to the end of the cuff. This thick gloves will help pr...

Rubber Gloves for Hot Syrup or Water, 14" from finger tip to end of the cuff. These gloves work great for cleaning a filter press or for cleaning e...

Stainless Steel Pins for Insulating Arch.

Stainless Insulation Clip

Bolt-On Regulating System with Float.For use with all welded Half Pint and Supreme BoilingPans.

A replacement float for a Grimm or Leader hot sap float. This float measures 8.5" x 4.5". They now are making them with a crank on the top which al...

This stainless welded float is used for the flue pan for many of new Leader evaporators. It measures 5 1/2" wide and is 10 3/4" long. It has a cran...

A stainless welded float that is 5" wide and 8.5" long. This float is for the syrup pan on a Small Brothers evaporator. It has a hole on each side ...

A stainless welded float that is 6 1/8" wide and 12" long. This float is for the flue pan on a Small Brothers evaporator. It has a hole on each sid...

The Z arm hot sap regulator. This is used on a Grimm evaporator or the Leader Patriots. If you need one of these it is best to call in the order. T...

This is the cold sap regulator for many of the old Small Brothers evaporators where the feed was coming in from the bottom. The bottom of this item...

Small Brothers Flue Pan Regulator Arm