All Products [hidden]

These used aluminum buckets hold roughly 2 - 2.5 gallons of sap. Many of these buckets have smaller holes for hanging on the trees and work better ...

Used Cast Soule or Warner Spout.

Used Marcland Automatic Draw-off Complete with a Brass Paddle Valve. Comes with the Temperature Probe and wire.

14" Roof Jack, Sidemount w/Collar, 5/12 Pitch

Used BHR Hobby Double Vacuum Releaser for up to 1,000 taps.

White Plastic Candy Divider Tray with 12 Cells.

Used 7 1/2" Leader Plastic Filter Press w/5 Frames and an Air Diaphragm Pump.

RO Bucket Kit (RB25) for 200 +/- Taps. It has 5 - 8gph membranes. Mounted on a wooden board that is roughly 4' long and from the floor to the top o...

Micro 3 RO Machine with Three - 4" Membranes. This unit was a micro2 that had a third post added and is set up on wheels. Was taken in on trade tow...

7" Wes Fab Full Size Filter Press with Gear Pump. 

3'x3' Waterloo Welded Syrup Pan. There are a few hot spots/dings on the bottom of the pan. 

4'x12' Set of Pans (8' Lead Free Soldered Flue Pan and 4' Welded Syrup Pan). The flue pan was made in 1993, the syrup pan was 2008. There is a litt...

Leader 3'x5' Aluminum Hood with Preheater. The Preheater appears to be homemade. 8" Thimble on the hood, and it comes with 1 section of stack. 

Used 5/16" Hole Cutter Drill

Used 125 Gallon Horizontal Plastic Tank w/Valve

1/2 Pint Leader Supreme Welded Pan (Factory Second). Not sure why it is a factory second. 

4'x4' Welded Stainless Syrup Pan with Tri-Clamp Fittings (like new)

10" H2O 6 Frame Aluminum Filter Press w/ Air Diaphragm Pump and Stand. Comes with a blocker plate so you can shorten up the press if you are runnin...

Leader Half Pint Evaporator w/SS Syrup Pan, SS Preheater Pan and Valves. The pans are welded. The back of the arch has been patched around the coll...

Used 2'x2' Smokey Lake Welded Syrup Pan (Grimm copy).

Used Leader Mini Extreme RO Machine w/Two 4" Membranes and Two Extra Membranes. This machine comes with the wash tank mounted on the RO.

BHR Moisture Trap

8" Maple Guy's Filter Press (for a Small Producer) w/Papers.

Lapierre Triple Pan Washer w/Tank, 1 HP Gould Pump and 3) 6'x2' Covers w/Spinners.

1,500 Gallon Stainless Bulk Tank w/Agitator. Rough dimensions including fittings 65" wide x 13' long x 8' high. Was previously used for heating up ...

New Airablo Horizontal Electric Releaser with 2-0.5hp 12 gpm 75psi internal pumps. Good for up to 4-5,000 taps.

Used 16"x16" Leader Gas Canner with SS Pan, Filter Rack, Cover, Valve and Thermometer.

Leybold Vacuum Pump, Oil Cooled, 110 Volts (for up to 600 taps)

D&G Round Drawoff Tank on Wheels w/Cover (25 +/- gallons). 28.5" from the floor to the top of the cover (not counting the handle). The tank its...

3'x20" Leader Welded Cross Flow Syrup Pan (New)

2'x5' Leader Welded Finishing Pan (New, factory second).

New 2'x4' Leader Vermonter Evaporator (Factory Second). The arch has a scratch/dent on one side roughly 10" long. Comes with the base stack, and 6'...

2'x2' Leader revolution Syrup Pan, Right Draw w/Closed Box (New Factory Second).

Bernard Vertical Double Vacuum Releaser. Good for up to 2,500 taps. Back manifold needs a clip replaced. Comes with a new clip.

Used 35 Gallon Plastic Horizontal Tank.

Used 1 1/2 HP Airablo Oil Cooled Vacuum Pump with Oil Reclaimer.

Airablo 1 1/2 HP Vacuum Pump w/Radiator Oil Cooler.

Used 30 Gallon Stainless Syrup Drum.

D&G 600 GPH RO Machine with a New 8" Membrane. This machine has a 1hp feed pump and a 5hp high pressure pump.

3,700 +/- Gallon Glass Lined Vacuum Tank w/New Paint on the Outside. Mounted on some Steel Beams. Roughly 109" high x 100" wide x 108" in total len...

Fork Truck Attachment for Picking up Drums (missing one arm) SOLD AS IS. Can be used as is to move 1 drum at a time.

Marcland Tank/High Level Alarm.  Just hook up a Romex or thermostat wire and put the other end of the wire in a tank. When the liquid level hits th...

Homemade Stainless Vacuum Booster Tank. This tank does have some fittings that have been broken off in it when they were removed.

Small Homemade Stainless Round Draw-off Tank w/Valve (10 1/2" diameter x 20" high).

Used 1/3 HP Electric Motor for Filter Press.

3'x8' CDL/Dallaire Evaporator w/Airtight Front and Blower, Welded (raised flue) Pans, Hood and SS Preheater. There is a little warping in the front...

Used 18" Stainless Steam Stack. 3' section.

Used 325 Gallon Poly Pickup Tank. Made to fit in the back of a truck.