All Products [hidden]

These used aluminum buckets hold roughly 2 - 2.5 gallons of sap. Many of these buckets have smaller holes for hanging on the trees and work better ...

Used Cast Soule or Warner Spout.

Used Marcland Automatic Draw-off Complete with a Brass Paddle Valve. Comes with the Temperature Probe and wire.

14" Roof Jack, Sidemount w/Collar, 5/12 Pitch

Used BHR Hobby Double Vacuum Releaser for up to 1,000 taps.

White Plastic Candy Divider Tray with 12 Cells.

Used Mainline Wire Reel.

Used BHR Vertical Double Vacuum Releaser. Good for up to 2,500 taps. 

Used 7 1/2" Leader Plastic Filter Press w/5 Frames and an Air Diaphragm Pump.

RO Bucket Kit (RB25) for 200 +/- Taps. It has 5 - 8gph membranes. Mounted on a wooden board that is roughly 4' long and from the floor to the top o...

Used Pump for a Micro1 or Micro2 RO Machine. Customer had it as a spare, but traded in his RO machine towards a larger one. 

Micro 3 RO Machine with Three - 4" Membranes. This unit was a micro2 that had a third post added and is set up on wheels. Was taken in on trade tow...

Used Homemade Moisture Trap. Has a ball inside and 1" threaded inlet/outlet. This moisture trap is made out of PVC and is all glued together. 

7" Wes Fab Full Size Filter Press with Gear Pump. 

3'x3' Waterloo Welded Syrup Pan. There are a few hot spots/dings on the bottom of the pan. 

4'x12' Set of Pans (8' Lead Free Soldered Flue Pan and 4' Welded Syrup Pan). The flue pan was made in 1993, the syrup pan was 2008. There is a litt...

Leader 3'x5' Aluminum Hood with Preheater. The Preheater appears to be homemade. 8" Thimble on the hood, and it comes with 1 section of stack. 

18" Stack Cover w/3' of 18" Galvanized Smoke Stack.

4' Leader Stainless Base Stack w/Oval corners and 18" Top. Bottom of the stack measures 44"x8".

Used 5/16" Hole Cutter Drill

Used Leader Tubing Reel with Hook. This tubing reel is still in excellent shape. 

Used CDL 9" Vacuum Filter Press. This vacuum press does not come with any filters. 

Used Two Hand Tubing Tool for 5/16" Tubing (some rust). This tool has had the cutter blade removed, but a new one could be purchased and installed. 

Electric Sap Guzzler Diaphragm Vacuum Pump (for up to 300 taps).  Each side has been reduced down to 1". 

Used 125 Gallon Horizontal Plastic Tank w/Valve

Propane Gas Burner Only (for a 16"x16" pan), NEW. Comes in a box that you assemble. Roughly 15.5" square and stands 13" high. 

40"x20" Welded Cross Flow Syrup Pan, Excellent. 2" tri-clamp pan connections, and 1.5" tri-clamp drawoff fittings. 

1/2 Pint Leader Supreme Welded Pan (Factory Second). Not sure why it is a factory second. 

4'x4' Welded Stainless Syrup Pan with Tri-Clamp Fittings (like new)

Leader Half Pint Evaporator w/SS Syrup Pan, SS Preheater Pan and Valves. The pans are welded. The back of the arch has been patched around the coll...

Used 2'x2' Smokey Lake Welded Syrup Pan (Grimm copy).

Used Leader Mini Extreme RO Machine w/Two 4" Membranes and Two Extra Membranes. This machine comes with the wash tank mounted on the RO.

8" Maple Guy's Filter Press (for a Small Producer) w/Papers.

Lapierre Triple Pan Washer w/Tank, 1 HP Gould Pump and 3) 6'x2' Covers w/Spinners.

New Airablo Horizontal Electric Releaser with 2-0.5hp 12 gpm 75psi internal pumps. Good for up to 4-5,000 taps.

Used 16"x16" Leader Gas Canner with SS Pan, Filter Rack, Cover, Valve and Thermometer.